As a commonly used pipe fixture, the open pipe card is also known as the open clamp, which provides a new type of steel pipe connection for the appearance of the open pipe card. In addition, the split line card is also called the grooved fittings, has many advantages, the precision is good, connect the pump pipe split the weight of the pipe clamp, weight big, pressure is bigger, so the quality of general and pump pipe split pipe clamp of supporting the use of synthetic sealing effect, is also very important accessories, cheap, but the effect is larger, concrete pump pipe, is above the pump pipe clamp, pump pipe is directly connected with the clamp, used to fix and seal of the interface, enable owing to correct delivery of concrete. The pump tube is the material of open tube card, general is ordinary casting, fine casting, then sandblasting dyeing, add screw and fittings, make a set of pump tube to open tube card.

1. Installation method of open pipe card

When the open pipe is installed, it is usually installed on the solder plate. In front of the device, it is very good to determine the direction of the clip, and it is advocated that the symbol should be done at the fixed place first, then the welding on the rear welding, and the lower half of the open pipe, which should be placed in a fixed pipe. Put the other half on the open pipe and cover plate and screw down. Do not directly weld the base of the open tube card.

Split pipe clamp is installed on the guide rail, rail welding in basis, or with screws, then push the guide screw nut in orbit, and 90 degrees, the second half of the split pipe clamp body embedded nut, put that need to be fixed on the tube, put up half of the pipe split card body and cover plate, with screws.

For the folded device, based on the guide rail welding in, or with screws, first to pack up and down half of the pipe clamp body outside, put on to fixed tube put up half of the pipe clamp body outside, with screws, after locking plate to avoid it. Then the second pair of the open tube card, the method is the same. The bending tube shall be fixed directly in the front and back of the bent tube with stdi on the pipe. Such support points should be fixed.

2. Main use of open pipe card

The open tube card is a kind of pipe that is commonly used in the installation of water heating. For ground fixation (note that the ground of the geothermal field or the position of the line where the pipeline is not to be fixed) the live line will not go through the gypsum line and the first pipe will be fixed.

The connection between the open pipe and pipe clamp

1. The main body of the open pipe card is divided into the main body of the open pipe and nut, the main materials are carbon steel, stainless steel and galvanized, respectively, which are used for the fixed function of the pipe.

2. The connection between the pipe clamp and the open pipe card is also used for the fixed function of the pipe, which is invariant in nature, but is different in terms of terms.

3, pipe clamp body is divided into the cover plate, pipe clamp body, base plate, bolt and nut to the Lord, then the cover plate and bottom plate material depends on customer's requirements, respectively, can be customized for the production of the material such as stainless steel, carbon steel, pipe clamp body can be customized for the production of materials such as plastic, aluminum alloy. It is mainly used to support fixed pipelines and is widely used in aviation, engineering machinery, steel, metallurgy, ships and so on. His standard is based on the national heavy machine standard, German sidford standard, dawn standard, and can also be designed according to customer requirements.